Monster.ca

Ouvrier métallurgiste/sidérurgique

Technicien de fabrication/de production (général)

Mécanicien industriel

Mécanicien de chantier

Technicien en génie industriel/mécanique

A Production Fabricator or Assembler constructs and assembles a wide range of products, such as engines, computers, aircraft, ships, boats, toys, electronic devices, and control panels, as well as the individual parts that make up these products. 

Opérateur de machine d'assemblage

Assembleur/transformateur de moteurs/machines

Assembleur électronique/électrique

Ouvrier de production

Finisseur/polisseur/lustreur

Transformateur/assembleur de production

A pneumatic tool, air tool, air-powered tool or pneumatic-powered tool is a type of power tool, driven by compressed air supplied by an air compressor. Pneumatic tools can also be driven by compressed carbon dioxide (CO2) stored in small cylinders allowing for portability.

Pneumatic Tools

Microscopy is the technical field of using microscopes to view objects and areas of objects that cannot be seen with the naked eye. There are three well-known branches of microscopy: optical, electron, and scanning probe microscopy, along with the emerging field of X-ray microscopy.

Microscopy

A rivet is a permanent mechanical fastener. Before being installed, a rivet consists of a smooth cylindrical shaft with a head on one end. The end opposite to the head is called the tail. On installation, the rivet is placed in a punched or drilled hole, and the tail is upset, or bucked, the head is supported against the direction of the tail when upsetting so it will stay on place, the tail expands to about 1.5 times the original shaft diameter, holding the rivet in place. In other words, the pounding or pulling creates a new "head" on the tail end by smashing the "tail" material flatter, resulting in a rivet that is roughly a dumbbell shape. To distinguish between the two ends of the rivet, the original head is called the factory head and the deformed end is called the shop head or buck-tail.

Riveting

In engineering, a mechanism is a device that transforms input forces and movement into a desired set of output forces and movement. Mechanisms generally consist of moving components which may include:Gears and gear trains;
Belts and chain drives;
Cams and followers;
Linkages;
Friction devices, such as brakes or clutches;
Structural components such as a frame, fasteners, bearings, springs, or lubricants;
Various machine elements, such as splines, pins, or keys.

Location	Salaire médian
Calgary, AB	$47,744
National	$44,672
Emplacement +/-	6% Supérieur
	Faites une autre recherche
	Montrez-moi les emplois associés

Location	Salaire médian
Calgary, AB	$47,744
National	$44,672
Emplacement +/-	6% Supérieur
	Faites une autre recherche
	Montrez-moi les emplois associés

Transformateur/assembleur de production Estimation salariale pour Calgary, AB
Lieux Proches...

Détails des salaires

Faites avancer votre carrière

Faites avancer votre carrière

Offres d'emploi en sur Monster

Transformateur/assembleur de production Estimation salariale pour Calgary, ABLieux Proches...

Détails des salaires

Salaire pour les emplois connexes

Salaire pour les emplois connexes

Faites avancer votre carrière

Faites avancer votre carrière

Offres d'emploi en sur Monster

Transformateur/assembleur de production Estimation salariale pour Calgary, AB
Lieux Proches...